PRODUCTS
YT 1800 / Hydraulic Milling and Grinding Engine Block‘s Flat Surfaces
- Cast-iron base
- Wheel dressing device fixed on grinding head
- Sliding cover system
- Hydraulic speed adjustable table
- Slides lubrication system
- Wheel rotation Speed adjustable
- Movable control panel
- Transmission head, up and down movement with ball screw system
- Table “V” type slide system
- The machine is produced of completely high quality cast-iron. Head rotating cast-iron. Head rotating speeds can be adjusted at any speed between 0-1400 rpm without cascade through electronic motor control device.
- The table is hydraulic and has variable speed control. While the table is in operation, you might adjust the table feed speed as you require. The table feed is out of vibration at even the lowest speeds. Meanwhile, the table slides on prismatic guides for continuous lubrication.
- Special sliding covers are designed in order to protect the operator of any explosion of the grinding wheels and prevent the splash of the water that is used along the grinding process. The stone rotating speed can be observed at a digital gauge placed on the control panel.
| Standard / Extra Equipments | Standard | Extra |
| Segmental wheel diam.400mm complete with 10 grinding segments | ● | |
| Grinding wheel balancing shaft | ● | |
| Toolholder complete with tool for the milling of cast iron and aluminum | ● | |
| Automatic device for rapid lifting and lowering of head | ● | |
| Automatic device for machine stop after cutting | ● | |
| Segmental wheel dressing apparatus | ● | |
| Set of two parallel supports 100x535 mm | 2 | |
| Clamping plates | 4 | |
| Hydraulic Units | ● | |
| Cooling Unit | ● | |
| Users Manuel | ● | |
| Magnetic Table | ● | |
| Magnetic Cooling Water Seperator | ● | |
| Hydraulic tank with cooling system | ● |
| Technical Specifications | YT 1800 | |
| Machine table surface | mm | 1700x320 |
| Max. Grinding length(-X axis) | mm | 1800 |
| Max. Grinding width(-Y axis) | mm | 400 |
| Distance between column guides and table center | mm | 450 |
| Max.Distance from wheel to table surface | mm | 900 |
| Max/Min. Table speed (-X axis) | m/dk | 0 - 8000 |
| Manual feed movement (-Z axis) | mm | 0.01 |
| Segmental Grinding Wheel diameter(max) | mm | 400 |
| Grinding wheel rotation speed(speed adjustable for NC) | rpm | 1 - 1400 |
| Electric system | V | 380 - 24 |
| Stroke motor (Z) | Kw | 0.37 |
| Hydraulic motor(X) | Kw | 2 |
| Spindle motor | Kw | 5.5 |
| cooling unıt pump motor | Kw | 0.37 |
| Work length of machine | mm | 4820 |
| Length of machine | mm | 3020 |
| Width of machine | mm | 1400 |
| Height of machine | mm | 2250 |
| Weight of machine | kg | 2850 |