PRODUCTS
YT 1200 / Hydraulic Milling and Grinding Engine Block‘s Flat Surfaces
- Cast iron body
- Wheel Dressing Apparatus delicate feed adjustable (fixed on grinding head)
- Z Axis automatic feeding
- ‘X Axis’ Hydraulic Table (Speed adjustable)
- Grinding wheel (Speed adjustable 0-1400)
- Movable(Portable) operation control panel
- Time setting automatic lubrication system for all slides and ball screws.
- Transmission down and up movements with ball screw and automatic lubrication.
- Ball screw system for table forward and backward with automatic lubrication.
- Linear slides (Z and X axis)
- Grinding wheel main shaft and Z axis with marble system
- Cooling unit with fabric filter (Magnetic seperator extra)
- Movable work lighting lamp
- Column curtain for secure the slides
- Grinding wheel protector cover’Level adjustable’ (‘CE’Standards)
- Full front cabin with sliding covers (‘CE’Standards)
- Cabin secure system switches (‘CE’Standards)
- Electric panel inside lighting lamp
The table is hydraulic and has variable speed control. While the table is in operation, you might adjust the table feed speed as you require. The table feed is out of vibration at even the lowest speeds. Meanwhile, the table slides on prismatic guides for continuous lubrication.
Special sliding covers are designed in order to protect the operator of any explosion of the grinding wheels and prevent the splash of the water that is used along the grinding process. The stone rotating speed can be observed at a digital gauge placed on the control panel
| Standard / Extra Equipments | Standard | Extra |
| Segmental wheel diam.400mm complete with 10 grinding segments | ● | |
| Grinding wheel balancing shaft | ● | |
| Toolholder complete with tool for the milling of cast iron and aluminum | ● | |
| Automatic device for rapid lifting and lowering of head | ● | |
| Automatic device for machine stop after cutting | ● | |
| Segmental wheel dressing apparatus | ● | |
| Set of two parallel supports 100x535 mm | 2 | |
| Clamping plates | 4 | |
| Hydraulic Units | ● | |
| Cooling Unit | ● | |
| Users Manuel | ● | |
| Magnetic Table | ● | |
| Magnetic Cooling Water Seperator | ● | |
| Hydraulic tank with cooling system | ● |
| Technical Specifications | YT 1200 | |
| Machine table surface | mm | 1300x300 |
| Max. Grinding length(-X axis) | mm | 1200 |
| Max. Grinding width(-Y axis) | mm | 300 |
| Distance between column guides and table center | mm | 400 |
| Max.Distance from wheel to table surface | mm | 600 |
| Max/Min. Table speed (-X axis) | m/dk | 0 - 8000 |
| Manual feed movement (-Z axis) | mm | 0.01 |
| Segmental Grinding Wheel diameter(max) | mm | 350 |
| Grinding wheel rotation speed | rpm | 1 - 1400 |
| Electric system | V | 380 - 24 |
| Stroke motor (Z) | Kw | 0.37 |
| Hydraulic motor(X) | Kw | 2 |
| Spindle motor | Kw | 2.9 |
| Cooling unıt pump motor | Kw | 0.37 |
| Work length of machine | mm | 4000 |
| Length of machine | mm | 2530 |
| Width of machine | mm | 1305 |
| Height of machine | mm | 2020 |
| Weight of machine | kg | 1925 |